Ο/H memoulas έγραψε:

Εκανα για άλλη μια φορά αγορά xiaomi συσκευής λόγω της μεγάλης υποστήριξης
που υπάρχει αλλά κατάλαβα τελικά ότι δεν είναι και τόσο μεγάλη αν δεν υπάρχει χρήμα στην μέση

Ο/H memoulas έγραψε:

Εκανα για άλλη μια φορά αγορά xiaomi συσκευής λόγω της μεγάλης υποστήριξης
που υπάρχει αλλά κατάλαβα τελικά ότι δεν είναι και τόσο μεγάλη αν δεν υπάρχει χρήμα στην μέση.

Ο/H memoulas έγραψε:

βοηθεια ζητησα και αμεσως καποια μελη αποκριθηκαν

First, update the BIOS version


In
order to better use the win10 system, you need to update the
corresponding version of bios, brush into transition android version can
be updated and unified bios version.
Prerequisite: miflash Brush tool has been installed, make sure the driver is properly installed millet


Step1: Download millet flat 2 Android wire brush package and platform-tools, and extract;
Android wire brush package: Link: http://pan.baidu.com/s/1jHmmo30 Password: qb9i
adb tool: tools.rar-Platform (1.44 MB, downloads: 11626)


Step2:
millet flat 2 manually enter Fastboot mode, enter the platform-tools
folder in the folder blank (as shown at the red box) pressing the shift
key + right mouse button and select "Open Command Window Here."




Step3: The Android wire brush inside the package flash_all.bat file into the command line, hit Enter, wait for the completion of Brush.



Step4: After the completion of Brush, typing on the command line and press Enter fastboot reboot command to restart the tablet, etc. The system represents a complete bios update was successful;

Second, install the Windows 10 system

Brush before you need the tool: Type-C OTG line, at least U disk 8G memory, FAT32 format <br /> The new bios default settings can be started from the U disk, the first step in determining when successfully updated bios,

Step5: Download win10-10586-Tkey.zip, unzip the PC, and copy all the unpacked files to the root directory of U.

Windows 10 Brush Pack: link: link: http://pan.baidu.com/s/1dEqDWh7 Password: 5477

Step6: millet flat 2 shutdown, connecting U disk OTG cable and equipment, the initiator can be self-installed, the following figure appears it means being installed.



Step7: After installation is complete, it will automatically shut down, you can manually press the power button to boot

Third, brush back MIUI system

Windows and support each brush MIUI, but need to brush back Android can brush back MIUI.

Step8: enter dnx mode
In the off state, press the power button to start the device, in the event when the rice, long press the volume + volume, about 15 seconds into the dnx mode.
After successfully entered dnx, a line will appear in the MI English word at the top left: "DNX FSTBOOT MODE ...".

[b]Step9:[/b] brush into fastboot file open CMD follow step2 step, enter the command "fastboot boot C: \ (path to your store Android wire brush package) \ Native-release \ images \ loader.efi", and then hit Enter, Equipment m rabbit fastboot screen appears.



Step10: brush back Android system in accordance with the steps step3, flash_all brush into the can, after completion of the manual knock command "fastboot reboot" to reboot the device.

Step11: Back brush MIUI system to download MIUI Developer Edition / stable release wire brush pack by miflash brush into it.